[Header] This file contains the common error codes. Along with the error codes is the associated warning level, the Default description and the description to be presented to the user. The Format is: ErrorCode=Severity,WarningLevel,Description,UserDescription If UserDescription is ommitted then the Description is used. [VisualBasic] 3=0,0,,Return without GoSub 5=1,0,,Invalid procedure call 6=2,0,,Overflow 7=0,0,,Out of memory 9=0,0,,Subscript out of range 10=0,0,,This array is fixed or temporarily locked 11=0,0,,Division by zero 13=0,0,,Type mismatch 14=0,0,,Out of string space 16=0,0,,Expression too complex 17=0,0,,Can't perform requested operation 18=0,0,,User interrupt occurred 20=0,0,,Resume without error 28=0,0,,Out of stack space 35=0,0,,Sub, Function, or Property not defined 47=0,0,,Too many DLL application clients 48=0,0,,Error in loading DLL 49=0,0,,Bad DLL calling convention 51=0,0,,Internal error 52=0,0,,Bad file name or number 53=0,0,,File not found 54=0,0,,Bad file mode 55=0,0,,File already open 57=0,0,,Device I/O error 58=0,0,,File already exists 59=0,0,,Bad record length 61=0,0,,Disk full 62=0,0,,Input past end of file 63=0,0,,Bad record number 67=0,0,,Too many files 68=0,0,,Device unavailable 70=0,0,,Permission denied 71=0,0,,Disk not ready 74=0,0,,Can't rename with different drive 75=0,0,,Path/File access error 76=0,0,,Path not found 91=0,5,,Object variable or With block variable not set 92=0,0,,For loop not initialized 93=0,0,,Invalid pattern string 94=0,0,,Invalid use of Null 97=0,3,,Can't call Friend procedure on an object that is not an instance of the defining class 98=0,0,,A property or method call cannot include a reference to a private object either as an argument or as a return value (Error 98) 298=0,0,,System DLL could not be loaded 320=0,0,,Can't use character device names in specified file names 321=0,0,,Invalid file format 322=0,0,,Can't create necessary temporary file 325=0,0,,Invalid format in resource file 327=0,0,,Data value named not found 328=0,0,,Illegal parameter; can't write arrays 335=0,0,,Could not access system registry 336=0,0,,ActiveX component not correctly registered 337=0,0,,ActiveX component not found 338=0,0,,ActiveX component did not run correctly 360=0,0,,Object already loaded 361=0,0,,Can't load or unload this object 363=0,0,,ActiveX control specified not found 364=0,0,,Object was unloaded 365=0,0,,Unable to unload within this context 368=0,0,,The specified file is out of date. This program requires a later version 371=0,0,,The specified object can't be used as an owner form for Show 380=0,0,,Invalid property value 381=0,0,,Invalid property-array index 382=0,0,,Property Set can't be executed at run time 383=0,0,,Property Set can't be used with a read-only property 385=0,0,,Need property-array index 387=0,0,,Property Set not permitted 393=0,0,,Property Get can't be executed at run time 394=0,0,,Property Get can't be executed on write-only property 400=0,0,,Form already displayed; can't show modally 402=0,0,,Code must close topmost modal form first 419=0,0,,Permission to use object denied 422=0,0,,Property not found 423=0,0,,Property or method not found 424=0,0,,Object required 425=0,0,,Invalid object use 429=0,0,,ActiveX component can't create object or return reference to this object 430=0,0,,Class doesn't support Automation 432=0,0,,File name or class name not found during Automation operation 438=0,0,,Object doesn't support this property or method 440=0,0,,Automation error 442=0,0,,Connection to type library or object library for remote process has been lost 443=0,0,,Automation object doesn't have a default value 445=0,0,,Object doesn't support this action 446=0,0,,Object doesn't support named arguments 447=0,0,,Object doesn't support current locale setting 448=0,0,,Named argument not found 449=0,0,,Argument not optional or invalid property assignment 450=0,0,,Wrong number of arguments or invalid property assignment 451=0,0,,Object not a collection 452=0,0,,Invalid ordinal 453=0,0,,Specified DLL function not found 454=0,0,,Code resource not found 455=0,0,,Code resource lock error 457=0,0,,This key is already associated with an element of this collection 458=0,0,,Variable uses a type not supported in Visual Basic 459=0,0,,This component doesn't support the set pf events 460=0,0,,Invalid Clipboard format 461=0,0,,Specified format doesn't match format of data 480=0,0,,Can't create AutoRedraw image 481=0,0,,Invalid picture 482=0,0,,Printer error 483=0,0,,Printer driver does not support specified property 484=0,0,,Problem getting printer information from the system. Make sure the printer is set up correctly 485=0,0,,Invalid picture type 486=0,0,,Can't print form image to this type of printer 520=0,0,,Can't empty Clipboard 521=0,0,,Can't open Clipboard 735=0,0,,Can't save file to TEMP directory 744=0,0,,Search text not found 746=0,0,,Replacements too long 31001=0,0,,Out of memory 31004=0,0,,No object 31018=0,0,,Class is not set 31027=0,0,,Unable to activate object 31032=0,0,,Unable to create embedded object 31036=0,0,,Error saving to file 31037=0,0,,Error loading from file 'DAO errors 2420=0,0,,Syntax error in number. 2421=0,0,,Syntax error in date. 2422=0,0,,Syntax error in string. 2423=0,0,,Invalid use of '.' '!' or '()'. 2424=0,0,,Unknown name. 2425=0,0,,Unknown function name. 2426=0,0,,Function isn't available in expressions. 2427=0,0,,Object has no value. 2428=0,0,,Invalid arguments used with domain function. 2429=0,0,,In operator without (). 2430=0,0,,Between operator without And. 2431=0,0,,Syntax error (missing operator). 2432=0,0,,Syntax error (comma). 2433=0,0,,Syntax error. 2434=0,0,,Syntax error (missing operator). 2435=0,0,,Extra ). 2436=0,0,,Missing ) ] or Item. 2437=0,0,,Invalid use of vertical bars. 2438=0,0,,Syntax error. 2439=0,0,,Wrong number of arguments used with function. 2440=0,0,,IIF function without (). 2442=0,0,,Invalid use of parentheses. 2443=0,0,,Invalid use of Is operator. 2445=0,0,,Expression too complex. 2446=0,0,,Out of memory during calculation. 2447=0,0,,Invalid use of '.' '!' or '()'. 2448=0,0,,Can't set value. 3000=0,0,,Reserved error ; there is no message for this error. 3001=0,0,,Invalid argument. 3002=0,0,,Couldn't start session. 3003=0,0,,Couldn't start transaction; too many transactions already nested. 3005=0,0,, isn't a valid database name. 3006=0,0,,Database is exclusively locked. 3007=0,0,,Can’t open library database . 3008=0,0,,The table is already opened exclusively by another user, or it is already open through the user interface and cannot be manipulated programmatically. 3009=0,0,,You tried to lock a table while opening it, but the table can't be locked because it is currently in use. Wait a moment, and then try the operation again. 3010=0,0,,Table already exists. 3011=0,0,,The Microsoft Jet database engine could not find the object . Make sure the object exists and that you spell its name and the path name correctly. 3012=0,0,,Object already exists. 3013=0,0,,Couldn't rename installable ISAM file. 3014=0,0,,Can't open any more tables. 3015=0,0,, isn't an index in this table. Look in the Indexes collection of the TableDef object to determine the valid index names. 3016=0,0,,Field won't fit in record. 3017=0,0,,The size of a field is too long. 3018=0,0,,Couldn't find field . 3019=0,0,,Operation invalid without a current index. 3020=0,0,,Update or CancelUpdate without AddNew or Edit. 3021=0,0,,No current record. 3022=0,0,,The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. 3023=0,0,,AddNew or Edit already used. 3024=0,0,,Couldn't find file . 3025=0,0,,Can't open any more files. 3026=0,0,,Not enough space on disk. 3027=0,0,,Can't update. Database or object is read-only. 3028=0,0,,Can't start your application. The workgroup information file is missing or opened exclusively by another user. 3029=0,0,,Not a valid account name or password. 3030=0,0,, isn't a valid account name. 3031=0,0,,Not a valid password. 3032=0,0,,Can't perform this operation. 3033=0,0,,You don't have the necessary permissions to use the object. Have your system administrator or the person who created this object establish the appropriate permissions for you. 3034=0,0,,You tried to commit or roll back a transaction without first using BeginTrans. 3036=0,0,,Database has reached maximum size. 3037=0,0,,Can't open any more tables or queries. 3039=0,0,,Couldn't create index; too many indexes already defined. 3040=0,0,,Disk I/O error during read. 3041=0,0,,Can't open a database created with a previous version of your application. 3042=0,0,,Out of MS-DOS file handles. 3043=0,0,,Disk or network error. 3044=0,0,, isn't a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. 3045=0,0,,Couldn't use ; file already in use. 3046=0,0,,Couldn't save; currently locked by another user. 3047=0,0,,Record is too large. 3048=0,0,,Can't open any more databases. 3049=0,0,,Can't open database . It may not be a database that your application recognizes, or the file may be corrupt. 3051=0,0,,The Microsoft Jet database engine cannot open the file . It is already opened exclusively by another user, or you need permission to view its data. 3052=0,0,,MS-DOS file sharing lock count exceeded. You need to increase the number of locks installed with Share.exe. 3053=0,0,,Too many client tasks. 3054=0,0,,Too many Memo or OLE Object fields. 3055=0,5,,Not a valid file name. 3056=0,0,,Couldn't repair this database. 3057=0,0,,Operation not supported on linked tables. 3058=0,0,,Index or primary key can't contain a Null value. 3059=0,0,,Operation canceled by user. 3060=0,0,,Wrong data type for parameter . 3061=0,0,,Too few parameters. Expected . 3062=0,0,,Duplicate output alias . 3063=0,0,,Duplicate output destination . 3064=0,0,,Can't open action query . 3065=0,0,,Can't execute a select query. 3066=0,0,,Query must have at least one destination field. 3067=0,0,,Query input must contain at least one table or query. 3068=0,0,,Not a valid alias name. 3069=0,0,,The action query cannot be used as a row source. 3070=0,0,,The Microsoft Jet database engine does not recognize as a valid field name or expression. 3071=0,0,,This expression is typed incorrectly or it is too complex to be evaluated. For example a numeric expression may contain too many complicated elements. Try simplifying the expression by assigning parts of the expression to variables. 3073=0,0,,Operation must use an updatable query. 3074=0,0,,Can't repeat table name in FROM clause. 3075=0,0,, in query expression . 3076=0,0,, in criteria expression. 3077=0,0,, in expression. 3078=0,0,,The Microsoft Jet database engine cannot find the input table or query . Make sure it exists and that its name is spelled correctly. 3079=0,0,,The specified field reference could refer to more than one table listed in the FROM clause of your SQL statement. 3080=0,0,,Joined table not listed in FROM clause. 3081=0,0,,Can't join more than one table with the same name . 3082=0,0,,JOIN operation refers to a field that isn't in one of the joined tables. 3083=0,0,,Can't use internal report query. 3084=0,0,,Can't insert data with action query. 3085=0,0,,Undefined function in expression. 3086=0,0,,Couldn't delete from specified tables. 3087=0,0,,Too many expressions in GROUP BY clause. 3088=0,0,,Too many expressions in ORDER BY clause. 3089=0,0,,Too many expressions in DISTINCT output. 3090=0,0,,Resultant table not allowed to have more than one AutoNumber field. 3092=0,0,,Can't use HAVING clause in TRANSFORM statement. 3093=0,0,,ORDER BY clause conflicts with DISTINCT. 3094=0,0,,ORDER BY clause conflicts with GROUP BY clause. 3095=0,0,,Can't have aggregate function in expression . 3096=0,0,,Can't have aggregate function in WHERE clause . 3097=0,0,,Can't have aggregate function in ORDER BY clause . 3098=0,0,,Can't have aggregate function in GROUP BY clause . 3099=0,0,,Can't have aggregate function in JOIN operation . 3100=0,0,,Can't set field in join key to Null. 3101=0,0,,The Microsoft Jet database engine can't find a record in the table with key matching field(s) . 3102=0,0,,Circular reference caused by . 3103=0,0,,Circular reference caused by alias in query definition's SELECT list. 3104=0,0,,Can't specify fixed column heading in a crosstab query more than once. 3105=0,0,,Missing destination field name in SELECT INTO statement . 3106=0,0,,Missing destination field name in UPDATE statement . 3107=0,0,,Record(s) can't be added; no insert permission on . 3108=0,0,,Record(s) can't be edited; no update permission on . 3109=0,0,,Record(s) can't be deleted; no delete permission on . 3110=0,0,,Couldn't read definitions; no read definitions permission for table or query . 3111=0,0,,Couldn't create; no modify design permission for table or query . 3112=0,0,,Record(s) can't be read; no read permission on . 3113=0,0,,Can't update ; field not updatable. 3114=0,0,,Can't include Memo or OLE Object when you select unique values . 3115=0,0,,Can't have Memo or OLE Object fields in aggregate argument . 3116=0,0,,Can't have Memo or OLE Object fields in criteria for aggregate function. 3117=0,0,,Can't sort on Memo or OLE Object . 3118=0,0,,Can't join on Memo or OLE Object . 3119=0,0,,Can't group on Memo or OLE Object . 3120=0,0,,Can't group on fields selected with '*' . 3121=0,0,,Can't group on fields selected with '*'. 3122=0,0,,You tried to execute a query that doesn't include the specified expression as part of an aggregate function. 3123=0,0,,Can't use '*' in crosstab query. 3124=0,0,,Can't input from internal report query . 3125=0,0,,The database engine can't find . Make sure it is a valid parameter or alias name, that it doesn't include invalid characters or punctuation, and that the name isn't too long. 3126=0,0,,Invalid bracketing of name . 3127=0,0,,The INSERT INTO statement contains the following unknown field name: . Make sure you've typed the name correctly, and try the operation again. 3128=0,0,,Specify the table containing the records you want to delete. 3129=0,0,,Invalid SQL statement; expected 'DELETE' 'INSERT' 'PROCEDURE' 'SELECT' or 'UPDATE'. 3130=0,0,,Syntax error in DELETE statement. 3131=0,0,,Syntax error in FROM clause. 3132=0,0,,Syntax error in GROUP BY clause. 3133=0,0,,Syntax error in HAVING clause. 3134=0,0,,Syntax error in INSERT INTO statement. 3135=0,0,,Syntax error in JOIN operation. 3136=0,0,,The LEVEL clause includes a reserved word or argument that is misspelled or missing, or the punctuation is incorrect. 3138=0,0,,Syntax error in ORDER BY clause. 3139=0,0,,Syntax error in PARAMETER clause. 3140=0,0,,Syntax error in PROCEDURE clause. 3141=0,0,,The SELECT statement includes a reserved word or an argument name that is misspelled or missing, or the punctuation is incorrect. 3143=0,0,,Syntax error in TRANSFORM statement. 3144=0,0,,Syntax error in UPDATE statement. 3145=0,0,,Syntax error in WHERE clause. 3146=0,0,,ODBC call failed. 3151=0,0,,ODBC connection to failed. 3154=0,0,,ODBC couldn't find DLL . 3155=0,0,,ODBC insert on a linked table failed. 3156=0,0,,ODBC delete on a linked table failed. 3157=0,0,,ODBC update on a linked table failed. 3158=0,0,,Couldn't save record; currently locked by another user. 3159=0,0,,Not a valid bookmark. 3160=0,0,,Table isn't open. 3161=0,0,,Couldn't decrypt file. 3162=0,0,,You tried to assign the Null value to a variable that isn't a Variant data type. 3163=0,0,,The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data. 3164=0,0,,The field can't be updated because another user or process has locked the corresponding record or table. 3165=0,0,,Couldn't open .inf file. 3166=0,0,,Cannot locate the requested Xbase memo file. 3167=0,0,,Record is deleted. 3168=0,0,,Invalid .inf file. 3169=0,0,,The Microsoft Jet database engine could not execute the SQL statement because it contains a field that has an invalid data type. 3170=0,0,,Couldn't find installable ISAM. 3171=0,0,,Couldn't find network path or user name. 3172=0,0,,Couldn't open Paradox.net. 3173=0,0,,Couldn't open table 'MSysAccounts' in the workgroup information file. 3174=0,0,,Couldn't open table 'MSysGroups' in the workgroup information file. 3175=0,0,,Date is out of range or is in an invalid format. 3176=0,0,,Couldn't open file . 3177=0,0,,Not a valid table name. 3179=0,0,,Encountered unexpected end of file. 3180=0,0,,Couldn't write to file . 3181=0,0,,Invalid range. 3182=0,0,,Invalid file format. 3183=0,0,,Not enough space on temporary disk. 3184=0,0,,Couldn't execute query; couldn't find linked table. 3185=0,0,,SELECT INTO on a remote database tried to produce too many fields. 3186=0,0,,Couldn't save; currently locked by user on machine . 3187=0,0,,Couldn't read; currently locked by user on machine . 3188=0,0,,Couldn't update; currently locked by another session on this machine. 3189=0,0,,Table is exclusively locked by user on machine . 3190=0,0,,Too many fields defined. 3191=0,0,,Can't define field more than once. 3192=0,0,,Couldn't find output table . 3196=0,0,,The database is already in use by another person or process. When the database is available, try the operation again. 3197=0,0,,The Microsoft Jet database engine stopped the process because you and another user are attempting to change the same data at the same time. 3198=0,0,,Couldn't start session. Too many sessions already active. 3199=0,0,,Couldn't find reference. 3200=0,0,,The record cannot be deleted or changed because table includes related records. 3201=0,0,,You can't add or change a record because a related record is required in table . 3202=0,0,,Couldn't save; currently locked by another user. 3203=0,0,,Subqueries cannot be used in the expression . 3204=0,0,,Database already exists. 3205=0,0,,Too many crosstab column headers . 3206=0,0,,Can't create a relationship between a field and itself. 3207=0,0,,Operation not supported on a Paradox table with no primary key. 3208=0,0,,Invalid Deleted setting in the Xbase key of the Windows Registry. 3210=0,0,,The connection string is too long. 3211=0,0,,The database engine couldn't lock table because it's already in use by another person or process. 3212=0,0,,Couldn't lock table ; currently in use by user on machine . 3213=0,0,,Invalid Date setting in the Xbase key of the Windows Registry. 3214=0,0,,Invalid Mark setting in the Xbase key of the Windows Registry. 3215=0,0,,Too many Btrieve tasks. 3216=0,0,,Parameter specified where a table name is required. 3217=0,0,,Parameter specified where a database name is required. 3218=0,0,,Couldn't update; currently locked. 3219=0,0,,Invalid operation. 3220=0,0,,Incorrect collating sequence. 3221=0,0,,Invalid settings in the Btrieve key of the Windows Registry. 3222=0,0,,Query can't contain a Database parameter. 3223=0,0,, is invalid because it's longer than 64 characters or contains invalid characters. 3224=0,0,,Can't read Btrieve data dictionary. 3225=0,0,,Encountered a record locking deadlock while performing a Btrieve operation. 3226=0,0,,Errors encountered while using the Btrieve DLL. 3227=0,0,,Invalid Century setting in the Xbase key of the Windows Registry. 3228=0,0,,Invalid CollatingSequence setting in the Paradox key of the Windows Registry. 3229=0,0,,Btrieve can't change field. 3230=0,0,,Out-of-date Paradox lock file. 3231=0,0,,ODBC field would be too long; data truncated. 3232=0,0,,ODBC couldn't create table. 3234=0,0,,ODBC remote query timeout expired. 3235=0,0,,ODBC data type not supported on server. 3238=0,0,,ODBC data out of range. 3239=0,0,,Too many active users. 3240=0,0,,Btrieve missing Btrieve engine. 3241=0,0,,Btrieve out of resources. 3242=0,0,,Invalid reference in SELECT statement. 3243=0,0,,None of the import field names match fields in the appended table. 3244=0,0,,Can't import password-protected spreadsheet. 3245=0,0,,Couldn't parse field names from the first row of the import table. 3246=0,0,,Operation not supported in transactions. 3247=0,0,,ODBC linked table definition has changed. 3248=0,0,,Invalid NetworkAccess setting in the Windows Registry. 3249=0,0,,Invalid PageTimeout setting in the Windows Registry. 3250=0,0,,Couldn't build key. 3251=0,0,,Operation is not supported for this type of object. 3252=0,0,,Can't open a form whose underlying query contains a user-defined function that attempts to set or get the form's RecordsetClone property. 3254=0,0,,ODBC Can't lock all records. 3256=0,0,,Index file not found. 3257=0,0,,Syntax error in WITH OWNERACCESS OPTION declaration. 3258=0,0,,The SQL statement couldn't be executed because it contains ambiguous outer joins. To force one of the joins to be performed first, create a separate query that performs the first join and then include that query in your SQL statement. 3259=0,0,,Invalid field data type. 3260=0,0,,Couldn't update; currently locked by user on machine . 3261=0,0,,Table is exclusively locked by user on machine . 3262=0,0,,Couldn't lock table ; currently in use by user on machine . 3263=0,0,,Invalid Database object. 3264=0,0,,No field defined cannot append TableDef or Index. 3265=0,0,,Item not found in this collection. 3266=0,0,,Can't append a Field that is already a part of a Fields collection. 3267=0,0,,Property can be set only when the Field is part of a Recordset object's Fields collection. 3268=0,0,,Can't set this property once the object is part of a collection. 3269=0,0,,Can't append an Index that is already a part of an Indexes collection. 3270=0,0,,Property not found. 3271=0,0,,Invalid property value. 3272=0,0,,Object isn't a collection. 3273=0,0,,Method not applicable for this object. 3274=0,0,,External table isn't in the expected format. 3275=0,0,,Unexpected error from external database driver . 3276=0,0,,Invalid database object reference. 3277=0,0,,Can't have more than 10 fields in an index. 3278=0,0,,The Microsoft Jet database engine has not been initialized. 3279=0,0,,The Microsoft Jet database engine has already been initialized. 3280=0,0,,Can't delete a field that is part of an index or is needed by the system. 3281=0,0,,Can't delete this index or table. It is either the current index or is used in a relationship. 3282=0,0,,Operation not supported on a table that contains data. 3283=0,0,,Primary key already exists. 3284=0,0,,Index already exists. 3285=0,0,,Invalid index definition. 3286=0,0,,Format of memo file doesn't match specified external database format. 3287=0,0,,Can't create index on the given field. 3288=0,0,,Paradox index is not primary. 3289=0,0,,Syntax error in CONSTRAINT clause. 3290=0,0,,Syntax error in CREATE TABLE statement. 3291=0,0,,Syntax error in CREATE INDEX statement. 3292=0,0,,Syntax error in field definition. 3293=0,0,,Syntax error in ALTER TABLE statement. 3294=0,0,,Syntax error in DROP INDEX statement. 3295=0,0,,Syntax error in DROP TABLE or DROP INDEX. 3296=0,0,,Join expression not supported. 3297=0,0,,Couldn't import table or query. No records found, or all records contain errors. 3298=0,0,,There are several tables with that name. Please specify owner in the format 'owner.table'. 3299=0,0,,ODBC Specification Conformance Error . Report this error to the developer of your application. 3300=0,0,,Can't create a relationship. 3301=0,0,,Can't perform this operation; features in this version are not available in databases with older formats. 3302=0,0,,Can't change a rule while the rules for this table are in use. 3303=0,0,,Can't delete this field. It's part of one or more relationships. 3304=0,0,,You must enter a personal identifier (PID) consisting of at least 4 and no more than 20 characters and digits. 3305=0,0,,Invalid connection string in pass-through query. 3306=0,0,,You've written a subquery that can return more than one field without using the EXISTS reserved word in the main query's FROM clause. Revise the SELECT statement of the subquery to request only one field. 3307=0,0,,The number of columns in the two selected tables or queries of a union query don't match. 3308=0,0,,Invalid TOP argument in select query. 3309=0,0,,Property setting can't be larger than 2K. 3310=0,0,,This property isn't supported for external data sources or for databases created with a previous version of Microsoft Jet. 3311=0,0,,Property specified already exists. 3312=0,0,,Validation rules and default values can't be placed on system or linked tables. 3313=0,0,,Can't place this validation expression on this field. 3314=0,0,,The field can't contain a Null value because the Required property for this field is set to True. Enter a value in this field. 3315=0,0,,Field can't be a zero-length string. 3316=0,0,,. 3317=0,0,,One or more values are prohibited by the validation rule set for . Enter a value that the expression for this field can accept. 3318=0,0,,Values specified in a TOP clause are not allowed in delete queries or reports. 3319=0,0,,Syntax error in union query. 3320=0,0,, in table-level validation expression. 3321=0,0,,No database specified in connection string or IN clause. 3322=0,0,,Crosstab query contains one or more invalid fixed column headings. 3323=0,0,,The query cannot be used as a row source. 3324=0,0,,The query is a DDL query and cannot be used as a row source. 3325=0,0,,Pass-through query with ReturnsRecords property set to True did not return any records. 3326=0,0,,This Recordset is not updatable. 3334=0,0,,Can be present only in version 1.0 format. 3336=0,0,,Btrieve: Invalid IndexDDF option in initialization setting. 3337=0,0,,Invalid DataCodePage option in initialization setting. 3338=0,0,,Btrieve: Xtrieve options aren't correct in initialization setting. 3339=0,0,,Btrieve: Invalid IndexDeleteRenumber option in initialization setting. 3340=0,0,,Query is corrupt. 3341=0,0,,The current field must match the join key in the table that serves as the 'one' side of one-to-many relationship. Enter a record in the 'one' side table with the desired key value, and then make the entry with the desired join key in the 'many-only' table. 3342=0,0,,Invalid Memo or OLE Object in subquery . 3343=0,0,,Unrecognized database format . 3344=0,0,,The database engine does not recognize either the field in a validation expression, or the default value in the table . 3345=0,0,,Unknown or invalid field reference . 3346=0,0,,Number of query values and destination fields aren't the same. 3349=0,0,,Numeric field overflow. 3350=0,0,,Object is invalid for operation. 3351=0,0,,The ORDER BY expression includes fields that aren't selected by the query. Only those fields requested in the first query can be included in an ORDER BY expression. 3352=0,0,,No destination field name in INSERT INTO statement . 3353=0,0,,Btrieve: Can't find file Field.ddf. 3354=0,0,,At most one record can be returned by this subquery. 3355=0,0,,Syntax error in default value. 3356=0,0,,You attempted to open a database that is already opened exclusively by user on machine . Try again when the database is available. 3357=0,0,,This query is not a properly formed data-definition query. 3358=0,0,,Can't open the Microsoft Jet engine workgroup information file. 3359=0,0,,Pass-through query must contain at least one character. 3360=0,0,,Query is too complex. 3361=0,0,,Unions not allowed in a subquery. 3362=0,0,,Single-row update/delete affected more than one row of a linked table. Unique index contains duplicate values. 3364=0,0,,Can't use Memo or OLE Object field in the SELECT clause of a union query. 3365=0,0,,Can't set this property for remote objects. 3366=0,0,,Can't append a relation with no fields defined. 3367=0,0,,Can't append. An object with that name already exists in the collection. 3368=0,0,,Relationship must be on the same number of fields with the same data types. 3370=0,0,,Can't modify the design of table . It's in a read-only database. 3371=0,0,,Can't find table or constraint. 3372=0,0,,No such index on table . 3373=0,0,,Can't create relationship. Referenced table doesn't have a primary key. 3374=0,0,,The specified fields are not uniquely indexed in table . 3375=0,0,,Table already has an index named . 3376=0,0,,Table doesn't exist. 3377=0,0,,No such relationship on table . 3378=0,0,,There is already a relationship named in the current database. 3379=0,0,,Can't create relationships to enforce referential integrity. Existing data in table violates referential integrity rules in table . 3380=0,0,,Field already exists in table . 3381=0,0,,There is no field named in table . 3382=0,0,,Size of field is too long. 3383=0,0,,Can't delete field . It's part of one or more relationships. 3384=0,0,,Can't delete a built-in property. 3385=0,0,,User-defined properties don't support a Null value. 3386=0,0,,Property must be set before using this method. 3388=0,0,,Unknown function in validation expression or default value on . 3389=0,0,,Query support unavailable. 3390=0,0,,Account name already exists. 3393=0,0,,Can't perform join, group, sort, or indexed restriction. A value being searched or sorted on is too long. 3394=0,0,,Can't save property; property is a schema property. 3396=0,0,,Can't perform cascading operation. Since related records exist in table , referential integrity rules would be violated. 3397=0,0,,Can't perform cascading operation. There must be a related record in table . 3398=0,0,,Can't perform cascading operation. It would result in a null key in table . 3399=0,0,,Can't perform cascading operation. It would result in a duplicate key in table . 3400=0,0,,Can't perform cascading operation. It would result in two updates to field in table . 3401=0,0,,Can't perform cascading operation. It would cause field to become Null, which is not allowed. 3402=0,0,,Can't perform cascading operation. It would cause field to become a zero-length string, which is not allowed. 3403=0,0,,Can't perform cascading operation: . 3404=0,0,,Can't perform cascading operation. The value entered is prohibited by the validation rule set for . 3405=0,0,,Error in validation rule. 3406=0,0,,The expression you're trying to use for the DefaultValue property is invalid because . Use a valid expression to set this property. 3407=0,0,,The server's MSysConf table exists, but is in an incorrect format. Contact your system administrator. 3409=0,0,,Invalid field name in definition of index or relationship. 3411=0,0,,Invalid entry. Can't perform cascading operation in table because the value entered is too large for field . 3412=0,0,,Can't perform cascading update on table because it is currently in use by user on machine . 3414=0,0,,Can't perform cascading operation on table because it is currently in use. 3415=0,0,,Zero-length string is valid only in a Text or Memo field. 3416=0,0,, 3417=0,0,,An action query cannot be used as a row source. 3418=0,0,,Can't open . Another user has the table open using a different network control file or locking style. 3419=0,0,,Can't open this Paradox 4.x or 5.x table because ParadoxNetStyle is set to 3.x in the Windows Registry. 3420=0,0,,Object reference is invalid or the object library isn't registered. 3421=0,0,,Data type conversion error. 3422=0,0,,Can't modify table structure. Another user has the table open. 3423=0,0,,You cannot use ODBC to import from, export to, or link an external Microsoft Jet or ISAM database table to your database. 3424=0,0,,Can't create database because the locale is invalid. 3428=0,0,,A problem occurred in your database. Correct the problem by repairing and compacting the database. 3429=0,0,,Incompatible version of an installable ISAM. 3430=0,0,,While loading the Microsoft Excel installable ISAM, OLE was unable to initialize. 3431=0,0,,This is not a Microsoft Excel 5.0 file. 3432=0,0,,Error opening a Microsoft Excel 5.0 file. 3433=0,0,,Invalid setting in Excel key of Engines section of the Windows Registry. 3434=0,0,,Can't expand named range. 3435=0,0,,Cannot delete spreadsheet cells. 3436=0,0,,Failure creating file. 3437=0,0,,Spreadsheet is full. 3438=0,0,,The data being exported does not match the format described in the Schema.ini file. 3439=0,0,,You attempted to link or import a Microsoft Word mail merge file. Although you can export such files, you cannot link or import them. 3440=0,0,,An attempt was made to import or link an empty text file. To import or link a text file, the file must contain data. 3441=0,0,,Text file specification field separator matches decimal separator or text delimiter. 3442=0,0,,In the text file specification , the option is invalid. 3443=0,0,,In the fixed-width specification , the does not specify a width. 3444=0,0,,In the fixed width specification , column does not specify a width. 3445=0,0,,Incorrect version of the DLL file was found. 3446=0,0,,Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) is missing. Try reinstalling the application that returned the error. 3447=0,0,,The Jet VBA file (VBAJET.dll for 16-bit versions, or VBAJET32.dll for 32-bit versions) failed to initialize when called. Try reinstalling the application that returned the error. 3448=0,0,,A call to an OLE system function was not successful. Try reinstalling the application that returned the error. 3449=0,0,,No country code found in connection string for a linked table. 3452=0,0,,You can't make changes to the design of the database at this replica. 3453=0,0,,You can't establish or maintain an enforced relationship between a replicated table and a local table. 3455=0,0,,Can't make the database replicable. 3456=0,0,,Can't make the object in container replicable. 3457=0,0,,You can't set the KeepLocal property for an object that is already replicated. 3458=0,0,,The KeepLocal property cannot be set on a database; it can be set only on the objects in a database. 3459=0,0,,After a database has been replicated, you cannot remove the replication features from the database. 3460=0,0,,The operation you attempted conflicts with an existing operation involving this member of the replica set. 3461=0,0,,The replication property you are attempting to set or delete is read-only and can't be changed. 3462=0,0,,Failure to load a DLL. 3463=0,0,,Can't find the .dll . 3464=0,0,,Data type mismatch in criteria expression. 3465=0,0,,The disk drive you are attempting to access is unreadable. 3468=0,0,,Access was denied while accessing dropbox folder . 3469=0,0,,The disk for dropbox folder is full. 3470=0,0,,Disk failure accessing dropbox folder . 3471=0,0,,Failure to write to the Synchronizer log file. 3472=0,0,,Disk full for path . 3473=0,0,,Disk failure while accessing log file . 3474=0,0,,Can't open the log file for writing. 3475=0,0,,Sharing violation while attempting to open log file in Deny Write mode. 3476=0,0,,Invalid dropbox path . 3477=0,0,,Dropbox address is syntactically invalid. 3478=0,0,,The replica is not a partial replica. 3479=0,0,,Can't designate a partial replica as the Design Master for the replica set. 3480=0,0,,The relationship in the partial filter expression is invalid. 3481=0,0,,The table name in the partial filter expression is invalid. 3482=0,0,,The filter expression for the partial replica is invalid. 3483=0,0,,The password supplied for the dropbox folder is invalid. 3484=0,0,,The password used by the Synchronizer to write to a destination dropbox folder is invalid. 3485=0,0,,The object can't be replicated because the database is not replicated. 3486=0,0,,You can't add a second Replication ID AutoNumber field to a table. 3487=0,0,,The database you are attempting to replicate can't be converted. 3488=0,0,,The value specified is not a ReplicaID for any member in the replica set. 3489=0,0,,The object specified can't be replicated because it is missing a necessary resource. 3490=0,0,,Can't create a new replica because the object in container could not be replicated. 3491=0,0,,The database must be opened in exclusive mode before it can be replicated. 3492=0,0,,The synchronization failed because a design change could not be applied to one of the replicas. 3493=0,0,,Can't set the specified Registry parameter for the Synchronizer. 3494=0,0,,Unable to retrieve the specified Registry parameter for the Synchronizer. 3495=0,0,,There are no scheduled synchronizations between the two Synchronizers. 3496=0,0,,Replication Manager cannot find the ExchangeID in the MSysExchangeLog table. 3497=0,0,,Unable to set a schedule for the Synchronizer. 3499=0,0,,Can't retrieve the full path information for a member of the replica set. 3500=0,0,,Setting an exchange with the same Synchronizer is not allowed. 3502=0,0,,The Design Master or replica is not being managed by a Synchronizer. 3503=0,0,,The Synchronizer's Registry has no value set for the key you queried. 3504=0,0,,The Synchronizer ID does not match an existing ID in the MSysTranspAddress table. 3506=0,0,,The Synchronizer is unable to open the Synchronizer log. 3507=0,0,,Failure writing to the Synchronizer log. 3508=0,0,,There is no active transport for the Synchronizer. 3509=0,0,,Could not find a valid transport for this Synchronizer. 3510=0,0,,The member of the replica set you are attempting to synchronize is currently being used in another synchronization. 3512=0,0,,Failed to read the dropbox folder. 3513=0,0,,Failed to write to the dropbox folder. 3514=0,0,,Synchronizer could not find any scheduled or on-demand synchronizations to process. 3515=0,0,,The Microsoft Jet database engine could not read the system clock on your computer. 3516=0,0,,Could not find transport address. 3517=0,0,,Synchronizer could not find any messages to process. 3518=0,0,,Could not find Synchronizer in the MSysTranspAddress table. 3519=0,0,,Failed to send a message. 3520=0,0,,The replica name or ID does not match a currently managed member of the replica set. 3521=0,0,,Two members of the replica set cannot be synchronized because there is no common point to start the synchronization. 3522=0,0,,Synchronizer cannot find the record of a specific synchronization in the MSysExchangeLog table. 3523=0,0,,Synchronizer cannot find a specific version number in the MSysSchChange table. 3524=0,0,,The history of design changes in the replica does not match the history in the Design Master. 3525=0,0,,Synchronizer could not access the message database. 3526=0,0,,The name selected for the system object is already in use. 3527=0,0,,The Synchronizer or Replication Manager could not find the system object. 3528=0,0,,There is no new data in shared memory for the Synchronizer or Replication Manager to read. 3529=0,0,,The Synchronizer or Replication Manager found unread data in the shared memory. The existing data will be overwritten. 3530=0,0,,The Synchronizer is already serving a client. 3531=0,0,,The wait period for an event has timed out. 3532=0,0,,Synchronizer could not be initialized. 3533=0,0,,The system object used by a process still exists after the process has stopped. 3534=0,0,,Synchronizer looked for a system event but did not find one to report to the client. 3535=0,0,,Client has asked the Synchronizer to terminate operation. 3536=0,0,,Synchronizer received an invalid message for a member of the replica set that it manages. 3538=0,0,,Cannot initialize Synchronizer because there are too many applications running. 3539=0,0,,A system error has occurred or your swap file has reached its limit. 3540=0,0,,Your swap file has reached its limit or is corrupted. 3541=0,0,,Synchronizer could not be shut down properly and is still active. 3542=0,0,,Process stopped when attempting to terminate Synchronizer client. 3543=0,0,,Synchronizer has not been set up. 3544=0,0,,Synchronizer is already running. 3545=0,0,,The two replicas you are attempting to synchronize are from different replica sets. 3546=0,0,,The type of synchronization you are attempting is not valid. 3547=0,0,,Synchronizer could not find a replica from the correct set to complete the synchronization. 3548=0,0,,GUIDs do not match or the requested GUID could not be found. 3549=0,0,,The file name you provided is too long. 3550=0,0,,There is no index on the GUID column. 3551=0,0,,Unable to delete the specified Registry parameter for the Synchronizer. 3552=0,0,,The size of the Registry parameter exceeds the maximum allowed. 3553=0,0,,The GUID could not be created. 3555=0,0,,All valid nicknames for replicas are already in use. 3556=0,0,,Invalid path for destination dropbox folder. 3557=0,0,,Invalid address for destination dropbox folder. 3558=0,0,,Disk I/O error at destination dropbox folder. 3559=0,0,,Failure to write because destination disk is full. 3560=0,0,,The two members of the replica set you are attempting to synchronize have the same ReplicaID. 3561=0,0,,The two members of the replica set you are attempting to synchronize are both Design Masters. 3562=0,0,,Access denied at destination dropbox folder. 3563=0,0,,Fatal error accessing a local dropbox folder. 3564=0,0,,Synchronizer can't find the source file for messages. 3565=0,0,,There is a sharing violation in the source dropbox folder because the message database is open in another application. 3566=0,0,,Network I/O error. 3567=0,0,,Message in dropbox folder belongs to the wrong Synchronizer. 3568=0,0,,Synchronizer could not delete a file. 3569=0,0,,This member of the replica set has been logically removed from the set and is no longer available. 3571=0,0,,The attempt to set a column in a partial replica violated a rule governing partial replicas. 3572=0,0,,A disk I/O error occurred while reading or writing to the TEMP directory. 3574=0,0,,The ReplicaID for this member of the replica set was reassigned during a move or copy procedure. 3575=0,0,,The disk drive you are attempting to write to is full. 3576=0,0,,The database you are attempting to open is already in use by another application. 3577=0,0,,Can't update replication system column. 3578=0,0,,Failure to replicate database; can't determine whether database is open in exclusive mode. 3581=0,0,,Can't open replication system table because the table is already in use. 3584=0,0,,Insufficient memory to complete operation. 3586=0,0,,Syntax error in partial filter expression. 3587=0,0,,Invalid expression in the ReplicaFilter property. 3588=0,0,,Error when evaluating the partial filter expression. 3589=0,0,,The partial filter expression contains an unknown function. 3592=0,0,,You can't replicate a password-protected database or set password protection on a replicated database. 3593=0,0,,Can't change a replicated database from allowing data changes at the Design Master and replicas to allowing data changes only at the Design Master. 3594=0,0,,Can't change a replicated database from allowing data changes only at the Design Master to allowing data changes at the Design Master and other replicas. 3595=0,0,,The system tables in your replica are no longer reliable and the replica should not be used. 3605=0,0,,Synchronizing with a non-replicated database is not allowed. The database is not a Design Master or replica. 3607=0,0,,The replication property you are attempting to delete is read-only and cannot be removed. 3608=0,0,,Record length is too long for an indexed Paradox table. 3609=0,0,,No unique index found for the referenced field of the primary table. 3610=0,0,,Same table referenced as both the source and destination in a make-table query. 3611=0,0,,Can’t execute data definition statements on linked data sources. 3612=0,0,,Multi-level GROUP BY clause is not allowed in a subquery. 3613=0,0,,Can’t create a relationship on linked ODBC tables. 3614=0,0,,GUID not allowed in Find method criteria expression. 3615=0,0,,Type mismatch in JOIN expression. 3616=0,0,,Updating data in a linked table is not supported by this ISAM. 3617=0,0,,Deleting data in a linked table is not supported by this ISAM. 3618=0,0,,Exceptions table could not be created on import/export. 3619=0,0,,Records could not be added to exceptions table. 3620=0,0,,The connection for viewing your linked Microsoft Excel worksheet was lost. 3621=0,0,,Can’t change password on a shared open database. 3622=0,0,,You must use the dbSeeChanges option with OpenRecordset when accessing a SQL Server table that has an IDENTITY column. 3623=0,0,,Cannot access the FoxPro 3.0 bound DBF file . 3624=0,0,,Couldn’t read the record; currently locked by another user. 3625=0,0,,The text file specification does not exist. You can’t import, export, or link using the specification. 3626=0,0,,The operation failed. There are too many indexes on table . Delete some of the indexes on the table and try the operation again. 'TxText control errors 20000=0,0,,page width too small 20001=0,0,,page width too large 20002=0,0,,page height too small 20003=0,0,,page height too large 20004=0,0,,left margin too large 20005=0,0,,right margin too large 20006=0,0,,top margin too large 20007=0,0,,bottom margin too large 20008=0,0,,TX produces an error code 20009=0,0,,window size too small for loading data 20010=0,0,,printing a page failed 20011=0,0,,OpenFile() failed 20012=0,0,,image: not enough memory 20013=0,0,,image: file does not exist 20014=0,0,,image: unknown file type 20015=0,0,,image: unsupported compression type 20016=0,0,,image: filter not found 20017=0,0,,image: unsupported filter type 20018=0,0,,creating HSZ string failed 20019=0,0,,invalid alignment value ( > 3) 20020=0,0,,invalid macro field number in 20021=0,0,,database record does not contain TX data 20022=0,0,,insufficient memory 20023=0,0,,invalid tab number in TabCurrent property 20024=0,0,,invalid tab type 20025=0,0,,attempt to set type of null tab 20026=0,0,,invalid zoom value 20027=0,0,,Spellchecker dictionary not found 20028=0,0,,Invalid indent setting 20029=0,0,,RTF filter error 20030=0,0,,IC.INI not found or invalid 20031=0,0,,property is read-only. 20032=0,0,,invalid image number in ImageCurrent property 20033=0,0,,attempt to load invalid TextControl data 20034=0,0,,database record does not contain ASCII data 20035=0,0,,Text import or export error 20036=0,0,,can not get/set object attributes 'Crystal Reports Errors 20500=0,0,,Not Enough Memory For Operation or Not Enough Memory To Get Selection Formula or Cannot Get Selection Formula. There is not enough memory available to complete the call. 20501=0,0,,Invalid Job Number. Internal error. 20502=0,0,,Invalid Text Handle or Parent Window Cannot Be An MDI Form orInvalid Parent Window Handle. You have specified an invalid window handle, or you have specified an MDI form as the parent of a print window. 20503=0,0,,Buffer Too Small For String. Internal error. 20504=0,0,,Report Not Found. You have specified a report that does not exist. 20505=0,0,,No Print Destination Specified or Invalid Print Destination. The Destination property must be 0, 1, or 2. You have specified a print destination other than one of these values. 20506=0,0,,Invalid File Number. You have tried to set an Nth file name and the file number you specified is out of the existing range: 0<= fileN < N files. 20507=0,0,,Invalid File Name. There is an error in the file name you specified. 20508=0,0,,Invalid Field Number. Internal error. 20509=0,0,,Invalid Field Name. You specified an invalid database field for a sort field. The program can't add the sort field name you specified. 20510=0,0,,Invalid Formula Name. The formula name you specified is invalid or nonexistent. 20511=0,0,,Invalid Sort Direction. A sort field must be preceded by a + or to indicate a valid sort direction. 20512=0,0,,Print Engine Not Open. Internal error. 20513=0,0,,Invalid Printer The printer driver for the printer you specified is missing. 20514=0,0,,Print File Exists. The name you have specified for the print file already exists. You must delete the file and print again or specify a different file. 20515=0,0,,Error In Formula. There is a formula error in the replacement formula text. Review the formula syntax and retry. 20517=0,0,,Print Engine Already In Use. Internal error. 20520=0,0,,Print Job Already Started. You are trying to start a print job that has already been started. This can happen if the user starts a print job and then tries to start printing again before the previous printing has finished. 20521=0,0,,Invalid Summary Field. The summary field specified as a group sort field is invalid or nonexistent. 20522=0,0,,Not Enough System Resources. There are not enough Windows system resources to process the function. 20524=0,0,,Print Job Busy. You tried to initiate printing while Crystal Reports is already printing a job. 20525=0,0,,Unable To Load Report. There is something wrong with the report you are trying to open. 20526=0,0,,No Default Printer. You haven't specified a default printer. Specify a default printer via the Windows Control Panel. 20527=0,0,,SQL Server Error. There is a problem connecting with the SQL server. 20529=0,0,,Disk Full. When printing to file or when sorting, the program requires more room than is available on the disk. 20530=0,0,,File I/O Error. In trying to print to file, the program is encountering another file problem besides disk full. 20531=0,0,,Incorrect Password. You have specified an incorrect password. 20532=0,0,,Missing Database DLL. The database DLL is corrupt. 20533=0,0,,Unable To Open Database File. Something is wrong with the database you have specified. You may need to verify using the Database|Verify Database command. 20534=0,0,,Error Detected By Database DLL. The database DLL is corrupt. 20535=0,0,,Unable To Connect:Incorrect Session Parameters. You have attempted to log on using incomplete or incorrect session parameters. 20536=0,0,,Unable To Connect:Incorrect Log On Parameters. You have attempted to log on using incomplete or incorrect log on parameters. 20537=0,0,,Unable To Connect:Incorrect Table Location. The table you have specified cannot be found. 20538=0,0,,Parameter Has Invalid Structure Size. Internal error. 20539=0,0,,Invalid Print Date You have specified an Invalid date using the PrintYear, PrintMonth, and PrintDay properties. 20540=0,0,,Missing or Outofdate Export DLL The DLL required by your export call is either missing or outofdate. 20541=0,0,,Error in Export DLL An export DLL has reported an error. 20542=0,0,,Already at the First Page Youre using the previous page button control in the Preview window when youre already at the first page of the report. 20543=0,0,,Already at the Last Page Youre using the next page button control in the Preview window when youre already at the last page of the report. 20544=0,0,,Report Open by Another User Access to the report file is denied. Another program or user may be using it. 20545=0,0,,User Has Cancelled Operation The user has Clicked the Cancel button in a dialog box during the session. 20546=0,0,,OLE 2.0 Not Available The program cant open the report (which includes an OLE 2.0 object) because OLE 2.0 cannot be loaded. 20547=0,0,,Invalid Crosstab Group You have specified an invalid row or column field in your crosstab report. 20548=0,0,,Crosstab is Missing a Summarized Field You are trying to run a crosstab report without specifying a summarized field. 20550=0,0,,Invalid Page Number You have specified a page number that does not exist in the current report. 20552=0,0,,No Stored Procedure in the Report The current report does not use a table based on a stored procedure. 20553=0,0,,Invalid Parameter The parameter you have specified does not exist in the stored procedure, or the value you have specified for a parameter is invalid for that parameter. 20554=0,0,,Graph Does Not Exist The graph number you have indicated for the section does not exist. 20555=0,0,,Graph Type is Invalid The type of graph you have specified with the GraphType property is invalid. 20557=0,0,,Graph col Value Cannot be Changed If the report is not a crosstab, the col value of the GraphData property cannot be different than the graphs current value. 20999=0,0,,Operation Not Yet Implemented. Internal error. [FUNCTIONS] 1=cscript.exe c:\lanier\scripts\sendmail.vbs sysadmin@ssi.net sysadmin@ssi.net "" "FAX Send Failed" "FAX Send Failed" 2= 3=